Tubeless Rim Tape - 30MM
Couldn't load pickup availability
The first place to start when moving over to tubeless. Long-lasting tape that fits a variety of rim sizes, in the classic Muc-Off pink.
The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.
SEMI-TRANSPARENT: The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole. It’s also the infamous Muc-Off pink so even the inside of your rims stay looking fresh AF.
SEAL PATCHES: Muc-Off Tubeless Rim Tape comes with four seal patches, so you’re never caught short.
VARIETY OF SIZES: We’ve developed our 10 metre Rim Tape roll in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.
HIGHLIGHTS
- Pressure-sensitive adhesive, creating the ultimate seal
- Semi-transparent to easily locate the valve hole
- Comes with 4x seal patches
Features
- The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole
- Infamous Muc-Off pink so even the inside of your rims stay looking fresh AF
- Comes with four seal patches, so you’re never caught short
- Comes in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims
- Extreme strength and durability
- Pressure sensitive adhesive ensures the ultimate air-tight seal
- Engineered to stretch to fit perfectly in the contour of your rim
- Comes as 10m roll - allowing for 4 applications
How To
- First up, clean your rim using our Glue & Selant remover to get rid of any unwanted residue that might be left behind from a previous setup
- Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above)
- Locate the valve hole
- Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole
- With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself
- Rotate the wheel around as you continue to apply the tape
- Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms
- Cut the tape at a 45 degree angle and press the edge down
- Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any
- Apply the finishing patch over the edge of the tape to ensure a firm seal
- Push the valve through the rim hole and secure with the 'O' ring and locking ring
- Refit the tyre and inflate - you're now ready to add your sealant!
20072
