Conduit Pull-On (Men's)
Couldn't load pickup availability
RAB - Men's Apparel Sizing Guide
MEN'S UPPER BODY SIZING
HOW TO MEASURE
- Arm length – Measure arm length from neck to wrist fold along the top of the arm with the arm fully extended.
- Chest – Measure horizontally around the fullest part of the chest.
- Waist - Measure horizontally around the narrowest part of the waist, your natural waist, at the small of the back or where your body bends if you lean to the side.
MEN'S UPPER BODY MEASUREMENT CHART
| XS | S | M | L | XL | XXL | |
| Chest | 90 cm 35.5" |
94 cm 37" |
102cm 40" |
109cm 43" |
117 cm 46" |
122 cm 48" |
| Waist | 71 cm 28" |
76 cm 30" |
81 cm 32" |
86 cm 34" |
91 cm 36" |
96 cm 38" |
| Arm Length | 83 cm 33" |
83 cm 33" |
86cm 34" |
89cm 35 |
91 cm 36" |
91 cm 36" |
While all of our garments are sized to these measurements, you will find that the cut on jackets designed for use in more extreme environments will be slightly more generous in the expectation that these designs will be used with additional/thicker mid-layers. If you plan on using a jacket like this with fewer layers beneath it, please keep this in mind when selecting your size.
MEN'S LEGWEAR SIZING
HOW TO MEASURE
- Waist - Measure horizontally around the narrowest part of the waist, your natural waist, at the small of the back or where your body bends if you lean to the side.
- Leg Length – Measure from the crotch (top of inner thigh) to where you would want the hem to sit on your foot or shoe
MEN'S LEGWEAR SIZING CHART
|
Waist |
XS-28" |
S-30" |
M-32" |
L-34" |
XL-36" |
XXL-38" |
|
Short |
- |
- |
30"/XS |
30"/XS |
30"/XS |
30"/XS |
|
Regular |
32" |
32" |
32" |
32" |
32" |
32" |
|
Long |
- |
34"/XL |
34"/XL |
34"/XL |
- |
- |
Fit
REGULAR FIT FOR GARMENTS
Designed to be versatile our Regular Fit garments are not closely fitted making them ideal for cross-seasonal use and multi-layering. Regular fit garments are contoured, with room for movement.
SLIM FIT FOR GARMENTS
Our Slim Fit garments are designed to be worn closer to the body or over layers such as baselayers and light mid-layers. Slim fit garments are close fitting for maximum performance when moving dynamically.
EXPEDITION FIT FOR GARMENTS
Expedition garments are designed to be worn in colder conditions over more layers of clothing than our other fits and are oversized slightly to allow for this.
The first layer you’ll reach for every morning of winter. This thin fleece pull-on is built for mountain ascents in cold conditions, wicking sweat quickly, to keep you warm, dry, and comfortable.
The Conduit range of baselayers is designed for mountain ascents in cold temperatures. Made with 92% recycled Thermic™ G fleece, they balance breathability and quick wicking with warmth and insulation. Ideal for days when you’re pushing your limits in bitter winter weather.
Ultra-soft next to skin with a double layer collar to keep the wind off your neck and a deep front zip to allow the air to flow when the way gets steep. With excellent mobility with high stretch throughout and easy arm lift, the Conduit Pull-On is perfect for cold weather climbing, alpinism, ski touring and mountaineering adventures.
The Specifics
- Fit: Slim
- Centre back length: (Size M): 73cm / 28.7inch
- Weight: 215g/7.5oz (size M)
- Product Code: QBL-38
- Lightweight gridded fleece fabric wicks moisture
- Double layer soft stand up collar
- Lightweight half length YKK® centre front zip for venting
- Set in sleeve construction with underarm panel for greater freedom of movement
- Flatlocked seams throughout for improved comfort
- Dropped hem improves warmth on lower back
- 92% Recycled Polyester, 8% Elastane
- Main Fabric: Thermic™ G (160gsm) Grid backer recycled polyester fleece
- Centre back length (Size M): 73cm / 28.7inch
Material Facts
Men's Conduit Pull-On
| Total Recycled Content* | 90% |
| Fabric | 92% |
| Zips | 34% |
| Trims | 38% |
| Fluorocarbon Content | |
| Fabric | No |
| Zips | Yes |
| Trims | No |
| Manufactured in China | |
| *Calculations based upon the weight of a UK men's size medium. | |
QBL-38
